chreeno.

This client's car is used for rallying purposes, so it's in very bad shape. Worked some of my magic on it. Didn't turn out perfect but looks a ton better than when it came in.

Before photos, as it was dropped off.

Time to get to work, Started out as always with the wheels, tires and wheel wells.

Sprayed down the tires with APC+ and gave them a good scrubbing.

Wheels got Griot's Heavy Duty Wheel Cleaner

super dirty wheels

Finally, after 2-3 cleanings per wheel they started to look new-ish again.

Cleaned up and polished the exhaust.

Pre-rinse, The car really had nothing on it protecting it. Time for foam!

much better

after claying and IPA wipedowns, Condition of the paint. Trashed.

All done, here are some afters.

Thanks for looking! Happy New Year!

When it was dropped off,

Dirty wheels

Exhaust tips pretty stained

Assembling the various items needed to attack the beast.

Tires getting some APC

Spraying down the wheel wells with some APC

Wheels got P21S Wheel Gel, let it dwell on the wheels for a few minutes

Dirt and brake dust everywhere

Spraying them down and looking good

That's more like it

On to the engine bay which was pretty dusty and dirty also.

Sprayed down the engine with P21S Total Auto Wash and left to dwell for a bit

Swissvax brush getting into the tight spots.

After, All cleaned up and dressed with Adam's In & Out Spray.

On to the wash:

Brought the car inside and foamed it down with some Dawn/Citrus Wash mixture to strip all previous protection from the paint. Foaming the car lifts all the dirt and grime away from the paint without scratching the paint as it drips off the vehicle.

Exhaust tips getting some work on them, used steel wool and Optimum Metal Polish.

Car got clayed with Clay Magic Blue clay, and ONR diluted to clay bar lube. As you see it wasn't pulling very much gunk from the hood, I clayed the front and rear bumpers which were pretty dirty. The rear bumper had tree sap all over it.

Tree Sap

Took my readings, turned out pretty normal and within healthy figures for correction purposes.

Pretty much the extent of the paint, Just usual water etching and a few RIDS here and there. For the car being a 2006 the paint was in good shape overall.

I did a few test sections using different compounds and found that M105/Surbuf on DA worked best.

Then polished down with PO85RD, then I used CG EZ-Creme Glaze to cleanse the paintwork and prep it for LSP.